Just in case you missed this article on updating a boring ceiling fan the first time we shared it a couple of years ago, we are republishing it. After Sharon wrote this blog originally, we got an awesome response. This is one of the PYP Best Blogs!

This is the ceiling fan that was in my daughter’s room when we bought our house:

Lay a fan blade out on the backside of the fabric and trace around it once for each fan blade, then cut them out.

Err on the side of cutting too big and not too small.  You don’t have to be too careful about the fabric fitting on exactly – if it hangs over just a touch it will be fine because no one will ever see the tops!

Now put a generous coat of Mod Podge on the fan blade

and then put the fabric on it.  Smooth it down with your hand as it begins to dry; I didn’t even iron the fabric first.  Between the Mod Podge and the smoothing, it will get the wrinkles out!

Let that dry about 15 minutes, then put a coat of Mod Podge on top of the fabric to seal it.  Let that sit until it is completely dry,

then use a drill bit to drill a hole through the fabric where the screw holes are in the fan blade.  Make sure the Mod Podge is totally dry or the fabric will come twisting off when you start to drill through it (uh…you know.  I’m IMAGINING that is what would happen anyway…..)

Screw the finished fan blades back into place and enjoy!