I started with three planks of barnwood.  I wanted it to look very primitive – it would work great with new wood if you don’t have barnwood on hand (what, doesn’t everyone?)  It will just not look as rough when it is finished.

Lay the planks out side by side and draw a large candy corn shape on them – spanning all three pieces of wood. Just freehand it – remember we are going for primitive.  Cut this out with a jigsaw or a scroll saw and sand all the pieces to remove any splinters.

Paint the pieces orange, white and yellow, let dry then rough it all up with a sanding block.  Now paint each piece with brown stain and then wipe off with a rag, leaving the stain down in the crevices of the wood.

Once that’s dry, drill holes in each piece like in the picture below.  This is how you will attach the pieces together.

Cut 8 pieces of wire about 5-6 inches long.

Line the pieces of wood up right next to each other – so the holes align – and use the holes to determine where you will bend each wire.

Bend each wire so that it looks like a huge staple, like this:

Then insert the “staples” through the holes so that they criss cross over each other, like this:

Turn the whole thing over, where you will see the “staples” all sticking straight out the back.

Use a pair of needle nosed pliers to bend the wires down.  I like to curl the ends under a bit so that they aren’t poky.  If I’m going to hang this on a door – or some other surface that I’m afraid will be scratched by the wires – then I would cut out a piece of felt or craft foam and glue it on the back to cover the staples.  That will also dampen the noise of it banging when you open and close the door.Now cut a longer piece of wire to use for hanging the finished piece.  Bend the ends at a right angle at about 6 inches in from each end.  Push those ends under the smaller wires on the back of the wood, inserting each end of the wire in from each side of the candy corn. Bend the wires around to secure them and if you like, cover them with felt as above.

I like to use a pencil to add a couple of curls into the wire.

Then cut small lengths of different colored matching ribbon and tie on one side,

and hang!

Print this Yoplait Frozen Yogurt, any Original or Greek Pint or Frozen Carton $1/1 coupon quickly, before it disappears.  These are $2.98 at my local Walmart, so just $1.98 after coupon!  Remember, you can print each coupon twice.

Print this Tetra Food or Water Care $2/1 coupon quickly, before it disappears.  My local Walmart has the Fish Flakes for $1.23 daily.  Walmart’s coupon policy states you will either receive cash back, or the overage will be applied to your basket purchase if the value of the coupon is more than the price of the item.  This means you will make $0.77 on each one you buy!  Remember, you can print each coupon twice.